Door Module Single Reader Interface

The ADS5200 and ADS5210 provide a Clock&Data/Wiegand interface between a card reader and the central controller (AC5100 or AC5200) for one card reader. When a cardholder presents an access card at an entry or exit reader the ADS5200 or ADS5210 reader interface interprets the encoded information and sends this data to the central controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time.

Note: Neither the ADS5200 nor the ADS5210 has an RS485 interface for card readers. They support only Clock & Data or Wiegand readers.

  • Support popular reader technologies
  • Door contact input
  • Request-to-exit input
  • Two auxiliary inputs
  • Lock/door strike output (relay)
  • Auxiliary output (open collector)
  • Reader power source
  • Supervision of input wires
  • Communications status LED
  • Activity status LED
  • Power status LED
  • Flash memory updateable
  • Ability to perform remote maintenance, significantly reducing overall maintenance
    times
  • Field management tool available
  • Host system compatibility for firmware and configuration download via ACC
Bot Verification

Verifying that you are not a robot...