MDF 100

MDF 100

MDF-100 . The Metal Detectors of the MDF Line are devices for the detection of metal contaminants accidentally present on products and industrial products, with sensitivity characteristics, immunity to interference and rapid response to meet the most stringent Quality Control requirements . The MDF metal detector is designed to be installed on conveyor belts. Alternatively, only the detection head can be provided for installation on external devices or pre-existing tapes. MDFit is proposed both in the monoblock solution (control unit and head in the same container) or in the solution with separate groups. Specially designed for the control of bulk or packaged products such as meat , pasta , biscuits , chocolate , fish , etc.



  • Power supply: 110-240 Vac, +/- 10%, 50-60 Hz.
  • Absorption: 60 VA.
  • Temperature range: -10 / + 55 ° C.
  • Relative humidity: 0-95% not condensed.
  • Built-in RS232 serial interface.
  • Built-in RS485 serial interface.
  • LCD display 4 lines for 20 characters for all the programming functions and for the indication of the signal level through the bar.
  • Visual alarm indicator (via LED), acoustic (via programmable ringing on the power board), electrical (via 3A 250 Vac programmable relay).
  • Power supply input protected by PTC and NTC, continuous power supply to the outside protected by self-resetting fuses.


  • Access password for user level programming.
  • Access password for operator level programming.
  • Programmability of all parameters.
  • Minimum maintenance.
  • Measurement of the signal proportional to the set threshold.
  • 400 levels of sensitivity.
  • Insertable filters for programming.
  • 50 memories that can be recalled for as many products.
  • Discarded piece totalizer.
  • Multifrequencies controlled quartz work.
  • Multi-analysis operation mode with high sensitivity to all magnetic and non-magnetic metals and high immunity to environmental disturbances.
  • Automatic compensation of the ” product effect “.


  • Motor drive board.
  • Test samples: ferrous, non-ferrous, stainless steel.
  • Remote signaling unit with siren and luminous flashing lights.
  • Degrees of protection above IP65.


  • Complies with CE standards.
  • Complies with ISO-FDA HACCP standards.
  • Complies with International Standards for Electrical Safety and Electromagnetic Compatibility.

Warning: file_get_contents(): SSL: Connection reset by peer in /home/herukris/public_html/wp-content/themes/prowebtwo/footer.php on line 49

Warning: file_get_contents(): Failed to enable crypto in /home/herukris/public_html/wp-content/themes/prowebtwo/footer.php on line 49

Warning: file_get_contents( Failed to open stream: operation failed in /home/herukris/public_html/wp-content/themes/prowebtwo/footer.php on line 49